Loading Documents; How To Load Documents - Fujitsu ScanSnap N1800 Operator's Manual

6.1

Loading Documents

This section describes how to load documents onto the scanner.

6.1.1 How to Load Documents

1. Check the number of document sheets.
For document sheet limits, refer to
(page
2. When loading multiple document sheets, fan the document stack.
1. Lightly grip the ends of the document stack in both hands, and fan two or three
times.
2. Rotate the documents 90 degrees, and fan again.
3. Align the edges of the document sheets.
3. Pull up the extension to hold the documents, and lift up the stacker.
Pull and lift up the stacker, as shown in the figure below.
Stacker
418).
"A.3 Maximum Document Loading Capacity"
Extension
236

6.1 Loading Documents