Cloning A Job Menu; Editing A Job Menu - Fujitsu ScanSnap N1800 Operator's Manual

■ Cloning a Job Menu

This section describes how to clone a job menu.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Sequences] tab.
The [Job Menus List] window appears.
3. Select the job menu to view.
4. Press the [Clone] button.
The [Job Menu Layout] area becomes active.
5. Clone the detailed job menu settings.
6. Press the [OK] button.
A job menu is added to the [Job Menus List] window.

■ Editing a Job Menu

This section describes how to edit a job menu.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Sequences] tab.
The [Job Menus List] window appears.
3. Select the job menu to be edited.
4. Press the [Edit] button.
The [Job Menu Layout] area becomes active.
5. Edit the detailed job menu settings.
6. Press the [OK] button.
The details of the job menu are changed.
4.17 Setting a Job Sequence
217