Configuring The Scanner Settings For Central Administration - Fujitsu ScanSnap N1800 Operator's Manual

5.3 Configuring the Scanner Settings for Central
Administration
This section describes the scanner settings.
The following settings for connecting a scanner to the Central Admin Server are required
to enable management by the Central Admin Console.
[Admin Connection] window
For details, refer to
[Scanner Central Admin Server] window
For details, refer to

5.3 Configuring the Scanner Settings for Central Administration

"4.8.8 Setting the Admin Connection" (page
"4.8.9 Setting a Central Admin Server" (page
234
121).
123).