Fujitsu ScanSnap N1800 Operator's Manual page 335

1. On the [Scan Settings] window, select the [Advanced] tab.
2. Press the [Edge Cropping] button.
The [Edge Cropping] window appears.
3. If edge cropping is to be used, enter the width of the edges to be
cropped.
4. Press the [OK] button.
This returns you to the [Scan Settings] window. The selected setting is displayed
to the right of the [Edge Cropping] button.
ATTENTION
If the total size of the edge cropping widths (top and bottom widths, and right and left widths)
is larger than the document size, edge cropping is not performed.
If page orientation is set, edge cropping is performed after the page orientation is corrected.
Example: "90° Left" is selected on the [Page Orientation] window.
Original document
Feed direction
Page Orientation
ABC
canned data is rotated
S
degrees left
90
335
6.9 Setting the Scan Options
Edge Cropping
ABC