Managing The System Log; Viewing The System Log Details - Fujitsu ScanSnap N1800 Operator's Manual

4.14.5 Managing the System Log

Up to 1,000 system information logs (such as for startup, shutdown, and system errors)
are saved in the scanner.
ATTENTION
System logs may contain private information such as e-mail addresses or fax numbers, so
care should be taken when managing such data.
If a log file error is detected during scanner operation, the log file will be cleared and the log
entry "Error 81001003 Corrupted system log file was deleted." is recorded.

■ Viewing the System Log Details

The system log summary is shown in date/time order. Even if the [Region/Timezone] or
[Date/Time] settings are changed, the order of the log entries will not be changed.
1. Select [Monitoring & Management]
The [System Log] window appears.
2. Select the log you wish to view.
The details of the selected log are displayed.
Pressing the [OK] button returns to the [System Log] window.
HINT
The [Date] format specified on the [Date/Time] window is used. For details, refer to
Setting the Date/Time" (page
The information of "Error" and "Warning" in [Type] will be sent to the e-mail address set in
"4.16.6 Setting the Destination for Alert Notifications" (page
[Status Details]
93).
176
4.14 Viewing the Scanner Details
[System Log].
196).
"4.5.4