Carrier Sheet - Fujitsu ScanSnap N1800 Operator's Manual

6.9.1 Carrier Sheet

Set whether or not a carrier sheet is used.
When using a carrier sheet, set the size of the scanned document to be output.
1. On the [Scan Settings] window, select the [Basic] tab.
2. Press the [Carrier Sheet] button.
The [Carrier Sheet] window appears.
3. If a carrier sheet is to be used, select the output size for the scanned
image.
This returns you to the [Scan Settings] window. The selected setting is displayed
to the right of the [Carrier Sheet] button.
6.9 Setting the Scan Options
303