Cleaning The Exterior Of The Scanner; Cleaning The Scanner Body; Cleaning The Lcd Touch Panel - Fujitsu ScanSnap N1800 Operator's Manual

7.2

Cleaning the Exterior of the Scanner

■ Cleaning the Scanner Body

The scanner exterior (LCD touch panel excluded), the ADF paper chute and the stacker,
must be cleaned using a dry cloth or a cloth slightly moistened with Cleaner F1 or a mild
detergent. Cleaning Wipes can also be used.
ATTENTION
Never use paint thinner or other organic solvents.
Make sure that water does not get inside the scanner when cleaning.
When a large amount of Cleaner F1 is used, it may take some time until it is dry. Use an
appropriate amount to moisten the cloths. Also, wipe off any extra cleaner from the part by
using a dry cloth.

■ Cleaning the LCD Touch Panel

To prevent the LCD touch panel screen from becoming dirty, it should be regularly
cleaned with a soft, dry cloth.
Take care when cleaning the LCD touch panel. It can be easily damaged, and should
never be scratched or banged with hard objects.
ATTENTION
Do not wipe the LCD touch panel with a damp cloth.
Dust on the panel surface may become stuck between the panel and frame, causing the LCD
touch panel to malfunction.

7.2 Cleaning the Exterior of the Scanner

Cloth
359
Mild detergent or
Cleaner F1
Paint thinner