Setting The Lan Manager Authentication Level - Fujitsu ScanSnap N1800 Operator's Manual

4.7.4 Setting the LAN Manager Authentication Level

Set the LAN Manager authentication level for connecting the scanner to a server.
The LAN Manager authentication level setting is enabled in the following cases:
The login LDAP server type is set to [Active Directory] or [Active Directory Global
Catalog], and the scanner is connected to an Active Directory server for logging in
to the scanner
The scanner is connected to a file server for saving the scanned images in a
network folder
The scanner is connected to a print server for printing the scanned images
For details on the LAN Manager authentication level, refer to the manual of the related
server.
ATTENTION
Setting the LAN Manager authentication level according to the server side settings is
recommended.
Check the LAN Manager authentication level set on the server side with the server
administrator before changing the level. If a level different from the level on the server side is
set, logging in to the scanner, saving data in the network folder or printing data may be
disabled.
1. Select [System Settings]
authentication level].
The [LAN Manager authentication level] window appears.
2. Enter the LAN Manager authentication level.
3. Press the [OK] button.
The LAN Manager authentication level is set.
Central Admin
Console
[Login Settings]
110
4.7 Configuring the Login-Related Settings
[LAN Manager