Processing A Job - Fujitsu ScanSnap N1800 Operator's Manual

6.14 Processing a Job

This section uses an example where buttons from [Job1] to [Job6] have been set.
1. On the [Job Menu] window, press a Job button.
HINT
When the scanner account belongs to multiple job groups, the [Job Menu] windows can
be switched by using the job menu switch buttons on the [Job Menu List] window,
which appears when a list button is pressed.
The Message Screen appears.
HINT
If either the title or message is not set in [Message Screen] on the [Job Details]
window, even when [Message Screen] is set to [On], the [Message Screen] will not be
shown. For details, refer to
If [Off] is selected for [Message Screen], scanning is started without showing the
[Message Screen], and the job is processed.
For details, refer to
When [Message Screen] is disabled, whether or not the [Message Screen] is shown
depends on the settings configured by the administrator.
Step 5 of "4.17.2 Setting a Job Sequence" (page
"6.14.1 Enabling/Disabling the Message Screen" (page
346

6.14 Processing a Job

204).
349).