Setting The Date/Time - Fujitsu ScanSnap N1800 Operator's Manual

4.5.4 Setting the Date/Time

1. Select [System Settings]
The [Date/Time] window appears.
ATTENTION
For Central Admin Console, the [Date/Time] input field and [Get Time] button cannot be
used.
2. Select a date format.
3. Enter the current date and time in the [Date/Time] input field.
Pressing the [Get Time] button refreshes the [Date/Time] input field with the current
value of the internal system date/time.
4. Press the [OK] button.
The date and time are set.
HINT
For the Admin Tool, an adjustment that advances the system time by 20 minutes or
more results in a session timeout and causes the scanner to logout. However, the
specified time adjustment will be made.
Central Admin
Console
[Local Settings]
93
4.5 Configuring the System
[Date/Time].