Fujitsu ScanSnap N1800 Operator's Manual page 286

4. Press the [OK] button.
This returns you to the [Save] window.
HINT
If the [File Server Authentication] window appears, enter authentication information
needed to access the file server and press the [OK] button.
5. In the [Save as] field, enter a file name for the scanned data to be saved.
ATTENTION
The following file names cannot be used:
CON
PRN
AUX
CLOCK$
NUL
COM0 to COM9
LPT0 to LPT9
\ and / are used as delimiters in a folder path.
The following symbols cannot be used:
: * ? " < > |
When the file format is changed on the window which is shown by pressing
[Scan Settings], the file name set on the [File Names (Save)] window is reset in the
[Save as] field.
6. Press to select whether or not to overwrite an existing file with the
same name.
Whether or not the file was successfully saved can be checked in the user log.
For more details about accessing the user log, refer to
Log" (page 343).
6.7 Saving the Scanned Data to a Network Folder
286
"6.12 Checking the User
for