Fujitsu ScanSnap N1800 Operator's Manual page 408

Saving is not possible after pressing [Save] on the [File Download]
dialog box.
■ Check item
Does the length of the [Save As] folder path (folder path plus file name)
exceed 259 characters?
■ Action
Change the [Save As] folder to shorten the path length.
Status window stops at "Printing scan data on ...".
■ Check item
Is there enough free space in the drive on which the spool folder for the print
server exists?
■ Action
Make sure that there is enough space in the drive.
An error occurs when installing an Admin Tool.
■ Check item
Is the language of the Admin Tool already installed different from that of the
operating system?
■ Action
Uninstall the existing Admin Tool. Then, install the Admin Tool of the same language as that of
the operating system.
When a fax is sent, the screen freezes on the scanning window.
■ Check item
Was the Scan button pressed repeatedly during scanning?
■ Action
Do not press the Scan button before scanning is completed.
Disconnect AC cable from the scanner to turn off the scanner, and connect the cable again. After
turning the power off, wait for at least 10 seconds before turning the power back on again.
If the problem persists even after taking the above mentioned actions, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
408
8.3 Other Troubleshooting