Setting Up For Administrator Access Via The Admin Tool; Checking The Web Browser Cache Settings - Fujitsu ScanSnap N1800 Operator's Manual

4.2.2 Setting up for Administrator Access via the Admin Tool

This section describes the required settings for logging in via the Admin Tool.
HINT
The following are required for administrator login via the Admin Tool:
"4.5.1 Setting the Scanner Name" (page 89)
"4.7.3 Changing the Admin Password" (page 109)
"4.8.1 Giving the Scanner an IP Address" (page 111)
"4.8.8 Setting the Admin Connection" (page 121)
"4.8.2 Setting the DNS Server" (page 113)
"4.8.3 Setting the WINS Server" (page 114)

■ Checking the Web Browser Cache Settings

Check the Web browser cache settings.
1. From the Web browser [Tools] menu, select [Internet Options].
The [Internet Options] dialog box appears.
2. On the [General] tab, press the [Settings] button for [Browsing history].
The [Temporary Internet Files and History Settings] dialog box appears.
3. For [Check for newer versions of stored pages], select [Automatically].
4. For [Disk space to use], specify 63 MB or above.
5. Press the [OK] button.
ATTENTION
The setup procedure may differ depending on the version of the Web browser.
Configure the network settings to not use a proxy server.
HINT
If any updates or service packs are available for the Web browser, make sure they are
applied.
75
4.2 Administrator Login