Color Mode - Fujitsu ScanSnap N1800 Operator's Manual

6.9.2 Color Mode

Set whether the document is scanned in "color" or "black and white".
1. On the [Scan Settings] window, select the [Basic] tab.
2. Press the [Color Mode] button.
The [Color Mode] window appears.
3. Select the color mode.
This returns you to the [Scan Settings] window. The selected mode is displayed
to the right of the [Color Mode] button.
HINT
Usually, the color mode should be set as [Auto].
If this setting is specified, there is no need to change the color mode each time you scan a
document.
Note that black and white or grayscale mode may be automatically selected for the following
kinds of documents:
Off-white papers
Documents with only a minor amount of color
Documents printed in gray or other close-to-black colors
Sections of 16 mm from top, bottom, left, and right edges of a document are out of the range
for automatic mode selection (for the smaller sizes of business card, postcard, A6 and B6, 4
mm from the edges), so that the shades of document edges or punched holes can be
avoided.
To ensure such documents are scanned in color mode, press the [RGB Color] button on the
[Color Mode] window.
A black and white document containing a shaded table can be recognized as grayscale.
6.9 Setting the Scan Options
304