Fujitsu ScanSnap N1800 Operator's Manual page 240

2. Open the carrier sheet and insert the document.
Align the fold with the right edge of the Carrier Sheet so that the document fits into
the Carrier Sheet at the upper corner.
HINT
When placing the carrier sheet with the printed black and white pattern to be at the top, the
front of the carrier sheet has the thick vertical line at the right side.
If [Face-up] is selected on the [Document Feed Direction] window, align the fold side with the
right edge of the carrier sheet so that the document fits into the carrier sheet at the lower
corner.
3. With the carrier sheet facedown, place the black and white pattern
section downward, and load it in the ADF paper chute.
After loading the carrier sheet, align the side guides with the carrier sheet.
240
6.1 Loading Documents