Checking The Number Of Sheets To Be Scanned - Fujitsu ScanSnap N1800 Operator's Manual

6.14.3 Checking the Number of Sheets to Be Scanned

When a job is processed, the expected number of sheets to be scanned can be specified,
so that the actual number of scanned sheets can be checked after a scan.
HINT
If either of the following settings is selected for the job sequence setting, the [Scan Count]
window is not shown.
The [Scan Count] is not to be checked
The [Scan Count] is to be checked, but the [Scan Count] window is set not to appear (The
[Allow per-Job adjustment] check box in the [Check the Scan Count] on the [Job Details]
window is not selected)
1. On the [Job Menu] window, press a Job button.
2. On the [Scan Count] window, enter the number of sheets that are to be
scanned, between 1 and 999.
ATTENTION
When [Print] is included in the job sequence, the number of sheets to be scanned can
be set within the range of 1 to 100 instead of 1 to 999.
For [Print], up to 100 pages can be scanned. For other than [Print], up to 999 pages
can be scanned. Therefore, for duplex scanning, make sure to set the number of
pages so as not to exceed these respective maximums.
352
6.14 Processing a Job