Paper Size - Fujitsu ScanSnap N1800 Operator's Manual

6.9.3 Paper Size

Set a paper size for the document to be scanned.
1. On the [Scan Settings] window, select the [Basic] tab.
2. Press the [Paper Size] button.
The [Paper Size] window appears.
3. Select a paper size.
This returns you to the [Scan Settings] window. The selected size is displayed to
the right of the [Paper Size] button.
ATTENTION
When the [Auto] setting is used, the paper size is set to the same size (Maximum: 215.9 ×
355.6 mm/8.5 × 14 in.) as the actual document being scanned.
However, if using any of the following types of documents, the automatic paper size detection
may not function correctly:
Paper of weight less than 52 g/m
Documents that are not rectangular
Documents of a longer length than legal size
HINT
If a paper size other than [Auto] is selected and only one side of the documents is scanned,
artwork on the reverse side of the paper may bleed through onto the front side scan. If this
happens, blank pages may not be recognized as such, and thus may not be skipped by the
[Skip Blank Page] function. For more details, refer to
When the [Custom] button is selected, any paper size for the scanned data can be specified
on the [Custom] window.
If the paper height is 355.6 mm (14 in.) or longer, the paper size setting must be set to allow
long pages. For details, refer to
2
(14 lb)
"6.9.17 Blank Page Skip" (page
"Long Page Mode" (page
305
6.9 Setting the Scan Options
306).
329).