Paper Size - Fujitsu ScanPartner SP30 Operator's Manual

Chapter 2 How to Load Documents
2.3 Documents for Scanning

Paper Size

The following paper sizes can be scanned:
ADF Maximum: A4 portrait (210 × 297 mm/8.3 × 11.7 in.),
legal (8.5 × 14 in.), long page (*1) (216 × 863 mm/8.5
× 34 in., 210 × 3048 mm/8.3 × 120 in.)
Minimum: A8 (52 × 74 mm/2 × 2.9 in.)
Flatbed Maximum: 216 × 297 mm/8.5 × 11.7 in.
*1: Depending on the application or scan settings (e.g. paper size), there
may be insufficient memory to perform scanning.
To scan documents longer than 863 mm (34 in.), set the resolution to
200 dpi or lower.
Conditions
Paper type
The following paper types are recommended:
Wood-free paper
Wood-containing paper
PPC paper (recycled)
Plastic card
When using paper types other than the above, make sure to test with
the same type of paper first to check if the document can be scanned.
Paper weight (thickness)
The following paper weights can be used:
2
41 to 209 g/m (11 to 56 lb)
2
127 to 209 g/m (34 to 56 lb) for A8 size
1.4 mm or less for plastic cards
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
42