Setting The Lan Manager Authentication Level - Fujitsu N7100 Operator's Manual

4.6.5 Setting the LAN Manager Authentication
Level Touch
Panel
Set the LAN Manager authentication level for connecting the scanner to a server.
The LAN Manager authentication level setting is enabled in the following cases:
 The login LDAP server type is set to [Active Directory] or [Active Directory Global
Catalog], and the scanner is connected to an Active Directory server for logging in
to the scanner
 The scanner is connected to a file server for saving the scanned images in a
network folder
 The scanner is connected to a print server for printing the scanned images
For details about the LAN Manager authentication level, refer to the manual of the related
server.
ATTENTION
 Setting the LAN Manager authentication level according to the server side settings is
recommended.
 Check the LAN Manager authentication level set on the server side with the server
administrator before changing the level. If a level different from the level on the server side is
set, logging in to the scanner, saving data in the network folder or printing data may be
disabled.
1. Select [LAN Manager authentication level] under [Login Settings].
 The [LAN Manager authentication level] window appears.
2. Set the LAN Manager authentication level.
3. Press the [OK] button.
 The information entered is set.
4.6 Configuring the Login-Related Settings
Central Admin
Console
99