Setting The Information Output Level - Fujitsu FI-6010N Operator's Manual

4.10.5 Setting the Information Output Level

1. Select the [Maintenance] tab on the top menu.
2. Select the [Technical Support] tab on the left side menu.
The "Technical Support" screen appears.
3. Enter the desired information output level.
The default level is "1".
Increasing the value of the output level increases the amount of information details col-
lected, but decreases the performance level. Set the level requested by your FUJITSU scan-
ner dealer or an authorized FUJITSU scanner service provider.
4. Press the [Set] button.
The information output level is set.
ATTENTION
If the "Information Output Level" is set to "5", the output data may
contain private user information such as e-mail addresses, so care
should be taken when managing such data.
fi-6010N Network Scanner Operator's Guide
4.10 Using the Maintenance Menus
4
175