CHAPTER 2 INSTALLATION
MDF Cable
MDF Cable
To facilitate the termination of the 25 pair cables (MDF cables) from the system to the MDF shown
in
Figure
2-43, the length of each cable to be used should be predetermined according to the
distance between the MDF and the system. Each cable should be labeled at both ends using a
cable number or cable designation as shown in
Table
2-2.
Figure 2-43 MDF Cable
CHAMP CONNECTOR
TO PIM
TWISTED 25 PAIR CABLES
TO MDF
2
NEAX2000 IVS
Installation Procedure Manual
Page 103
ND-70928 (E), Issue 1.0