Figure 2-58 Mounting Of Pz-M542/Pz-M557 Card (1 Of 2) - NEC NEAX 2000IVS2 Installation Manual

CHAPTER 2 INSTALLATION
Digital Trunk Interface (DTI)
STEP 2: Connect the LT connector on the PZ-M542/PZ-M557 card to the LTC connector on
BWB in PIM.
NOTE: Two PZ-M542/PZ-M557 cards can not be mounted on the adjoining LTC connectors.
LTC0 and LTC2/LTC0 and LTC3/LTC1 and LTC3 are mountable.

Figure 2-58 Mounting of PZ-M542/PZ-M557 Card (1 of 2)

When connecting to LTC1 or LTC3
Page 142
PIM
LTC CONNECTOR
LT CONNECTOR
PZ-M547/PZ-M557
LTC CONNECTOR
When connecting to LTC0 or LTC2
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0