CHAPTER 1 GENERAL INFORMATION
Application Processor Card Mounting Conditions
Application Processor Card Mounting Conditions
(1) System Capacity for Application Processor Card
Max. 24 cards per system
Max. 256 ports per system
(2) Mounting Application Processor Cards in PIM0
Use slots AP00 to AP11 to mount application processor cards in PIM0.
AP11 Slot (FP11 slot) of PIM0 is not available for application processor if the system is
configured with three or more PIMs, as this slot is used to mount FP card for that
configuration.
Figure 1-9 Application Processor Card Mounting Slots (PIM0)
AC/DC
PWR
PIM 0
DC/DC
PWR
*1 Application processor cards can be mounted in AP00 to AP10 slots.
*2 AP11 slot is available for application processor cards only when the system is configured
with two or less PIMs.
Page 32
*
LTC1
LTC0
BWB
FRONT
1
LTC2
NEAX2000 IVS
*
2
LTC3
2
Installation Procedure Manual
ND-70928 (E), Issue 1.0