Line/Trunk Card Mounting Conditions
(1) System Capacity for Line/Trunk Card
Max. 64 ports per PIM
Max. 512 ports per system
(2) Mounting Line/Trunk Cards in PIM0
Use Slots LT00 to LT11 to mount line/trunk cards in PIM0.
LT11 slot (FP11 slot) of PIM0 is not available for line/trunk cards if the system is configured
with three or more PIMs, as this slot is used to mount FP card for that configuration.
Figure 1-11 Line/Trunk Card Mounting Slots (PIM0)
AC/DC
PWR
PIM0
DC/DC
PWR
*1 8-port Line/Trunk cards can be mounted in LT00 to LT07 slots.
*2 4-port Line/Trunk cards can be mounted in LT00 to LT10 slots.
*3 LT11 slot is available for 4-port line/trunk cards only when the system is configured with
two or less PIMs.
2
NEAX2000 IVS
Installation Procedure Manual
ND-70928 (E), Issue 1.0
*
LTC1
LTC0
BWB
FRONT
CHAPTER 1 GENERAL INFORMATION
Line/Trunk Card Mounting Conditions
1
*
2
LTC2
*
3
LTC3
Page 35