Figure 2-75 Switch Setting On The Sn610/708/709/712 Attcon (1 Of 2) - NEC NEAX 2000IVS2 Installation Manual

Integrated voice server

Hide thumbs Also See for NEAX 2000IVS2:

Table of Contents

CHAPTER 2 INSTALLATION

SN610/708/709/712 ATTCON (DLC)

STEP 2: Set the switch located inside the console according to the type of headset/handset con-

nected. Refer to next page.

Figure 2-75 Switch Setting on the SN610/708/709/712 ATTCON (1 of 2)

• Slide the directory out of the way.

Then insert a flat screw driver's blade into the notched opening and apply light upward pres-

sure until the access panel is clear of the front lip. At the same time apply pressure (toward

you) at the rear of the pedestal to move the access panel.

Neax2000 ivs2