NEC NEAX 2000IVS2 Installation Manual page 413

Lamp Indications
LAMP
COLOR
NAME
CPU RXD Green
Board
TXD Red
MOD Green
RI Red
HDD Red
–
BIOS Red
–
DSP BL0-7 Red
Board
SWP Red
DSP Green/
Flashing
Red/
Flashing
PL0-3 Red
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0
CHAPTER 3 LAMP INDICATIONS AND SWITCH SETTINGS
Not used
Not used
Not used
Incoming call
Accessing to the HDD
Built-in hard disk is faulty
BIOS programming is in operation
DOS mode has been activated
• Remains lit when the corresponding circuit is in use.
• Flashes at 60 IPM when the corresponding circuit is in make-
busy state or the system data for this card is not assigned.
30 seconds after the MB switch is turned ON (upward) (The cir-
cuit card can be plugged/unplugged while this pilot lamp is on.)
According to voice mail application program in use.
DSP circuit operating
FUNCTION
PZ-VM00-M (VM)
Page 387