NEC NEAX 2000IVS2 Installation Manual page 272

CHAPTER 3 LAMP INDICATIONS AND SWITCH SETTINGS
PN-2BRTC (BRT)
SWITCH NAME
SW11 (DIP SW)
ON
1 2 3 4
The figure in the SWITCH NAME column and the position in
column indicate the standard setting of the switch. When the switch is not set as shown by the
figure and , the setting of the switch varies with the system concerned.
NOTE 1: Set the groove on the switch to the desired position.
NOTE 2: When the power is on, flip the MB switch to ON (UP position) before plugging/unplug-
ging the circuit card.
Page 246
SWITCH SETTING
NUMBER POSITION
ON
1
OFF
2
ON
NOTE 3
NOTE 4
OFF
3 ON
NOTE 3
OFF
NOTE 4
ON
4
OFF
FUNCTION
For normal operation
Not used
Output clock signals according to
the switch setting of SW11-3.
Do not output clock signals.
Output clock signals to PLO 0 of MP .
Output clock signals to PLO 1 of MP .
AP No. 04-15
AP No. 20-31
in the SETTING POSITION
NEAX2000 IVS
CHECK
(Continued)
2
Installation Procedure Manual
ND-70928 (E), Issue 1.0