NEC NEAX 2000IVS2 Installation Manual page 49

Table 1-5 Line/Trunk Card Name and Function (Continued)
EQUIPMENT FUNCTIONAL
NAME
PN-8DLCP DLC
PN-2DPCB DPC
PN-2ILCA ILC
PN-4LCC LC
[For Others]
PN-4LCD-A LC
PN-4LCE LC
[For
Australia]
PN-4LCF LC
[For
Australia]
PN-4LCK LC
[For China]
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0
NAME
8-line Digital Line Circuit Card for D
DSS Console, ATTCON, DESKCON
[–27V version, 2-wire type]
2-line Data Port Controller Card
Used for intra-office or inter-office digital data transmission
on nailed down connection.
Accommodates max. two DTEs with V.11 (X.21) interface or
V.24/V.28 (RS-232C) interface.
2-line ISDN Line Circuit Card
Provides a physical interface to ISDN Terminals.
Occupies eight time slots per one card.
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance: Max. 600 ohms (including telephone set)
4-Line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
Provides momentary open and Message Waiting Lamp
control functions for each circuit.
Equipped with +80V DC-DC on-board power supply.
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance: Max. 600 ohms (including telephone set)
4-line Analog Line Circuit Card for Single Line Telephones
Loop resistance: Max. 600 ohms (including telephone set)
Provides Message Waiting Lamp control function for each
circuit, and reverse function for only No. 3 circuit.
Equipped with +80V DC-DC on-board power supply.
4-Line Analog Line Circuit Card for Single Line Telephones
Loop resistance : Max. 600 ohms (including telephone set)
CHAPTER 1 GENERAL INFORMATION
FUNCTION
term
75/65 (Series E/III),
Line/Trunk Card
Page 23