CHAPTER 2 INSTALLATION
Floor Standing Installation
• Connection of PIM and BASE for Fixed/Stationary Equipment
(1) Mount the PIM on the BASE by placing it over the hooks.
(2) Slide the PIM into the inner end.
(3) Fix the PIM to the BASE with three screws.
NOTE:
Screws are attached to the Module.
SCREWS
SLIDE PIM INTO
INNER END.
Page 64
Figure 2-13 Connection of PIM and BASE
BASE
HOOKS
PIM
BASE
2
NEAX2000 IVS
Installation Procedure Manual
ND-70928 (E), Issue 1.0