CHAPTER 2 INSTALLATION
Internal Battery Connection
Internal Battery Connection
(1) Connect the BATT CA INT cable to the batteries as shown below.
(2) Mount the battery unit (24V DC, 3.2-3.4AH) into the PIM.
(3) Plug the BATT CA INT connector into the BATT1 connector on the PZ-PW121 card.
(4) Secure the batteries and battery cable using tie wraps.
DIMENSION OF BATTERY
67 mm
(2.6 inch)
60 mm
(2.4 inch)
134 mm
(5.3 inch)
Recommended Batteries
Yuasa NPH-3.2-12
Matsushita LCR-12V 3.4NE
BATT CA INT
Page 96
Figure 2-37 Internal Battery Mounting (1 of 2)
PIM
TO BATT1
CONNECTOR
ON PZ-PW121
RED
+
BLACK
+
INTERNAL BATTERY UNIT
(24V DC, 3.2 TO 3.4AH)
BLUE/BLACK
2
NEAX2000 IVS
Installation Procedure Manual
ND-70928 (E), Issue 1.0