NEC NEAX 2000IVS2 Installation Manual page 47

Table 1-5 Line/Trunk Card Name and Function (Continued)
EQUIPMENT FUNCTIONAL
NAME
PN-4COTE COT
[For
Australia]
PN-4COTG COT
PN-6COTJ COT
[For
Australia]
PN-8COTR COT
PN-8COTS COT
PN-8COTT COT
[For
Australia]
PN-8COTQ COT
PN-2CSIA CSI
[For North
America/
Latin
America]
PN-2CSIA-A CSI
[For Austra-
lia/Others]
PN-4DATC DAT
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0
NAME
4-line Central Office Trunk Card (Loop Start Trunk)
Provides a detector for line fault conditions.
4-line Central Office Trunk Card (Loop Start trunk)
Provides loop detection, receiving/sending the Caller ID
(CLASS SM) signal.
6-line Central Office Trunk Card (Loop Start Trunk)
Provides a detector for line fault conditions.
8-line Central Office Trunk Card (Loop Start Trunk)
8-line Central Office Trunk Card (Ground Start Trunk)
Provides loop detection, sending/detecting ground on Tip/
Ring wire.
8-line Central Office Trunk Card (Loop Start Trunk)
Provides a detector for line fault conditions.
8-line Central Office Trunk Card (Loop Start Trunk)
Provides loop detection, receiving/sending the Caller ID
(CLASS SM) signal.
2-line Zone Transceiver Interface Card
Used to interface with the ZT, based on ISDN S-interface.
Max. two ZTs can be connected per CSI card.
Occupies eight time slots per one card.
2-line Cell Station Interface Card
Used to interface with the CS, based on ISDN S-interface.
Max. two CSs can be connected per one card.
Occupies eight time slots per one card.
4-line Digital Announcement Trunk Card
Recording duration: Max. 120 seconds
Occupies eight time slots per one card.
CHAPTER 1 GENERAL INFORMATION
FUNCTION
Line/Trunk Card
Page 21