NEC NEAX 2000IVS2 Installation Manual page 48

CHAPTER 1 GENERAL INFORMATION
Line/Trunk Card
Table 1-5 Line/Trunk Card Name and Function (Continued)
EQUIPMENT FUNCTIONAL
NAME
PN-2DITA DIT
[For Hong
Kong]
PN-4DITB DIT
PN-DK00 DK
PN-2DLCB/ DLC
PN-2DLCN
PN-2DLCC DLC
PN-4DLCF DLC
PN-4DLCM DLC
PN-4DLCQ DLC
PN-8DLCL DLC
Page 22
NAME
2-line Direct Inward Dialing Trunk Card
Provides loop detection, sending reverse signal and PB to
DP signal conversion.
Equipped with –48V DC-DC on-board power supply.
4-line Direct Inward Dialing Trunk Card
Provides loop detection, sending reverse signal and PB to
DP signal conversion.
Equipped with –48V DC-DC on-board power supply.
8-circuit External Relay Control/External Key Scan Card
Provides the above-mentioned control functions on a per cir-
cuit basis.
2-line Digital Long Line Circuit Card for D
term
III), D
[–48V version, 2-wire type]
Equipped with –48V DC-DC on-board power supply.
2-line Digital Long Line Circuit Card for SN610 ATTCON
[–48V version, 4-wire type]
Equipped with –48V DC-DC on-board power supply.
4-line Digital Line Circuit Card for SN610 ATTCON
[–27V version, 4-wire type]
4-line Digital Line Circuit Card for D
term
D 70/60 (Elite/Electra Pro), DSS Console, ATTCON,
DESKCON
[–27V version, 2-wire type]
4-line Digital Line Circuit Card for D
DSS Console, ATTCON, DESKCON
[–27V version, 2-wire type]
8-line Digital Line Circuit Card for D
term
D 70/60 (Elite/Electra Pro), DSS Console, ATTCON,
DESKCON
[–27V version, 2-wire type]
FUNCTION
70/60 (Elite/Electra Pro), DSS Console, ATTCON
term
75/65 (Series E/
term
75/65 (Series E/III),
term
75/65(Series E/III),
term
75/65 (Series E/III),
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0