Stationary Equipment (For North America/Australia); Fixed Equipment (For North America/Australia); Fixed Equipment (For Other Countries) - NEC NEAX 2000IVS2 Installation Manual
Integrated voice server
Hide thumbs
Also See for NEAX 2000IVS2:
- Manual (211 pages) ,
- Maintenance manual (156 pages) ,
- Retrofit manual (34 pages)
Table of Contents
Advertisement
Stationary Equipment (For North America/Australia)
The equipment is placed on the BASE TRAY which is fixed on the floor, and is connected to 120V/
240V AC Power Source using AC CORD-D cable.
For installation of Stationary Equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE TRAY
Fixed Equipment (For North America/Australia)
The equipment is fixed on the floor by BASE PLATE and anchor bolts, and is connected to AC
Power Distribution Board using installation cable.
For installation of this equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE PLATE
Fixed Equipment (For Other Countries)
The equipment is fixed on the floor by BASE PLATE and anchor bolts, and is connected to 120V/
240V AC Power Source using AC CORD-D cable.
For installation of this equipment, see the following pages.
WIRING AC CABLE TO TERMINALS
INSTALLATION OF MAIN EQUIPMENT - Floor Marking for BASE PLATE
2
NEAX2000 IVS
Installation Procedure Manual
ND-70928 (E), Issue 1.0
Stationary Equipment (For North America/Australia)
- Using AC CORD-D
- Installation of PIM, For Stationary Equipment
Page 55
- Using installation Cable
- Installation of PIM, For Fixed Equipment
Page 55
- Using AC CORD-D
- Installation of PIM, For Fixed Equipment
Page 55
CHAPTER 2 INSTALLATION
Page 50
Page 58
Page 52
Page 58
Page 50
Page 58
Page 47
Advertisement
Table of Contents
