CHAPTER 2 INSTALLATION
Floor Standing Installation
• Connection of PIMs
NOTE:
The FRONT STOPPER, BUILD PLATES, and screws are attached to the PIM.
(1) Insert the BUILD PLATES (R)/(L) into the slits of the SIDE FRAME, then slide them
backward and lock them.
(2) Place the FRONT STOPPER on the PIM, then secure it with three screws.
Page 66
Figure 2-15 Connection of BUILD PLATE
BUILD PLATE (R)
SIDE FRAME
BUILD PLATE (L)
NEAX2000 IVS
2
Installation Procedure Manual
ND-70928 (E), Issue 1.0