NEC NEAX 2000IVS2 Installation Manual page 81

A
Installation of PIM
Installation of
Multiple-Module
Installation of
Top Cover
Installation of
Mounting Bracket
Checking
End
2
NEAX2000 IVS Installation Procedure Manual
ND-70928 (E), Issue 1.0
• For Fixed Equipment
(1) Fix the BASE PLATE to the floor with anchor bolts.
(2) Fix the BASE to the BASE PLATE with screws. See
(3) Fix the PIM onto the BASE with screws. See
• For Stationary Equipment
(1) Fix the BASE TRAY to the floor with anchor bolts.
(2) Fix the PIM onto the BASE with screws. See
(3) Place the Module and the BASE on the BASE TRAY. See
14.
• Connect PIMs with screws. See
• Install the I/F BRACKET to the top-stack PIMs if the equipment is
stacked with five or more PIMs. See "Installation of I/F BRACKET" on
Page 69.
• Install the TOP COVER to the top-stack PIM. See "Installation of TOP
COVER" on Page
• Install the MOUNTING BRACKET to the top-stack PIM if the equipment
is stacked with four or more PIMs. See "Installation of MOUNTING
Page
BRACKET" on
• Carefully review every step above to ensure that all necessary screws
are properly placed and tightened.
Figure
70.
71.
CHAPTER 2 INSTALLATION
Floor Standing Installation
Figure
Figure 2-13.
Figure 2-13.
2-17.
2-12.
Figure 2-
Page 55