Xacli - Command-Type - Parameter Value Types; Command Parameter Value Types; Format For Value Types - TANDBERG Codec 3000 MXP Reference Manual

About the TANDBERG API
XACLI – Command-type Commands – Parameter Value Types

Command Parameter Value Types

The system supports the following value types:
•
Integer values
•
Literal values
•
String values
•
E164 string values (strings only containing digits,
'#' and '*')
•
IPv4 Address values
•
IPv6 Address values
•
IPv4 or IPv6 Address values
D 13887.08
MAY 2008
Integer values:<x..y>
Defines the valid range for an integer input. x = min value, y = max value.
<1..100>
Literal values: <X/Y/../Z>
Defines the possible values for a given configuration.
<On/Off/Auto>
String values: <S: x, y>
Defines that the valid input for this configuration is a String with minimum length x and maximum length
of y characters.
<S: 0, 49>
<IPAddr>
IPv4 Address values:
Defines that the input must be an IPv4 address.
<IPAddr>
<IPv6Addr: x, y>
IPv6 Address values:
Defines that the input must be an IPv6 address with minimum length x and maximum length y.
<IPv6Addr: 0, 43>
IPv4 or IPv6 Address values: <IPv4v6Addr: x, y>
Defines that the input must be an IPv4 or IPv6 address with minimum length x and maximum length y.
<IPv4v6Addr: 0, 43>
50
REFERENCE GUIDE FOR SYSTEM INTEGRATORS

Format for Value Types

TANDBERG 3000 MXP & 6000 MXP