Command Instructions; Status Information Commands - TANDBERG Codec 3000 MXP Reference Manual

Finding the Information You Need
What's New in This Version?
Key Help: <On/Off>
New in this version. Enables/disables the given key on the
TANDBERG Remote Control (TRC4).
Key MainCam: <On/Off>
New in this version. Enables/disables the given key on the
TANDBERG Remote Control (TRC4).
Key PC: <On/Off>
New in this version. Enables/disables the given key on the
TANDBERG Remote Control (TRC4).
Key DocCam: <On/Off>
New in this version. Enables/disables the given key on the
TANDBERG Remote Control (TRC4).
Key VCR: <On/Off>
New in this version. Enables/disables the given key on the
TANDBERG Remote Control (TRC4).
Key AUX: <On/Off>
New in this version. Enables/disables the given key on the
TANDBERG Remote Control (TRC4).

Command Instructions

Observe that the (r) in the Command instructions denotes that
the parameter is required. The (r) appears for your information
only and is not a part of the instruction.
There are no new xCommand instructions for this version.

Status Information Commands

There are no new xStatus instructions for this version.
D 13887.08
MAY 2008
5
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP