Related Manuals for TANDBERG Codec C90 D14129.02
Summary of Contents for TANDBERG Codec C90 D14129.02
- Page 1 Software version TC1.0 NOVEMBER 2008 TANDBERG Codec C90 Administrator Guide D14129.02—NOVEMBER 2008...
-
Page 2: Table Of Contents
NTP Time Zone expressions ... 51 Supported RFCs in SIP ... 54 TANDBERG Remote Control TRC5 ... 55 TANDBERG Remote Control TRC5 key map ... 56 The PrecisionHD camera ... 57 CE Declaration for Codec C90 ... 58 China RoHS table ... 59 TANDBERG Codec C90 dimensions ... - Page 3 Introduction Contents Introduction Getting started Thank you for choosing TANDBERG! Your TANDBERG Codec C90 has been designed to give you many years of safe, reliable operation. How to read this document You will find that some places information has been copied from other chapters (but adapted, when needed) to let you have all the relevant information there and then.
-
Page 4: Intellectual Property Rights
Getting started Intellectual Property Rights This Administrator Guide and the Products to which it relates contain information that is proprietary to TANDBERG and its licensors. Information regarding the Products is found on the page entitled License Agreements and Patent Information. - Page 5 Codec C90 Introduction Contents Introduction Getting started Safety Instructions Water and Moisture Do not operate the apparatus under or near water – For your protection please read these safety for example near a bathtub, kitchen sink, or laundry instructions completely before you connect the tub, in a wet basement, near a swimming pool or in equipment to the power source.
- Page 6 • Comply with all relevant environmental legislation. Digital User Guides TANDBERG is pleased to announce that we have replaced the printed versions of our user guides with digital versions available on the TANDBERG web site: environmental benefits of this are significant. The user guides can still be printed locally, whenever needed.
-
Page 7: Getting Started
Codec C90 Getting started Contents Introduction Getting started This chapter introduces you to the codec and gets you up and going. This guide has been divided into several chapters, all of which provide different information. You can access the chapters directly by clicking on the menu bar at the top of this page. - Page 8 Codec C90 Getting started Contents Introduction Getting started Assemble your system The illustration shows you the basic setup when connecting your monitor, PC, camera, microphone, loudspeakers (if applicable), LAN and line voltage to your codec. Monitor (Audio from HDMI 1 or Line Out 1–2) OPTIONAL: Dual monitor setup...
- Page 9 Codec C90 Getting started Contents Introduction Getting started Using the Remote Control The functions keys in the upper part of the remote control reflects the soft keys on screen..and the middle part of the remote control is used to handle the video part of the call.
-
Page 10: Toggle Between Lower Case
Codec C90 Getting started Contents Introduction Getting started Using the Remote CALL KEY Control, cont... INITIATE CALL: Select a name from the Phone book or enter the name, number or URI and press the Call key to initiate the call. SHORTCUT TO RECENT CALLS: Use the Call button as a The functions keys shortcut to Recent Calls when the Call menu is not visible. - Page 11 Codec C90 Getting started Contents Introduction Getting started Turn on the system • Turn on the codec and wait a few minutes for the system to start • Make sure the remote control has the batteries installed. • Press Home ( ) on the remote control to show the menu on screen •...
-
Page 12: Time Zone Settings
H323 alias, gatekeeper address, etc. For SIP type of communication, similar type of information will be supplied. For networks administrated through TMS (TANDBERG Management Suite), your TMS administrator will be able to assist you when configuring. The H323 and SIP settings are configured from the Administrator Settings menu: Navigate to Settings >... - Page 13 Codec C90 Getting started Contents Introduction Getting started About main and dual monitors The main monitor The main monitor can be connected to the default video output HDMI 1 or one of the other outputs which are HDMI 3, DVI-I 2 or DVI-I 4. Connecting to HDMI 1 When you connect the main monitor to the default video output on Codec C90 the menu, icons and other information on screen (OSD -...
- Page 14 Codec C90 Administrator Guide About the menus Contents Introduction Getting started About the menus About the settings Settings Library Cameras Appendices Contact us Chapter 3 About the menus In this chapter... Explains the menu system D14129.02—NOVEMBER 2008...
- Page 15 Codec C90 User Guide. You can download the Codec C90 User Guide from our web site. Go to: http://www.tandberg.com/docs D14129.02—NOVEMBER 2008 About the menus About the menus About the settings The Home menu...
- Page 16 Codec C90 Administrator Guide Admin. Settings menu Contents Introduction Getting started About the menus About the settings Settings Library Cameras Appendices Contact us Chapter 4 The Settings menu In this chapter... Explaining the administrator settings D14129.02—NOVEMBER 2008...
-
Page 17: Administrator Settings
Codec C90 User Guide. You can download the Codec C90 User Guide from our web site. Go to: http://www.tandberg.com/docs D14129.02—NOVEMBER 2008 Admin. Settings menu About the menus About the settings HOME... - Page 18 Codec C90 User Guide. You can download the Codec C90 User Guide from our web site. Go to: http://www.tandberg.com/docs D14129.02—NOVEMBER 2008 Admin. Settings menu About the menus About the settings HOME...
- Page 19 Codec C90 Contents Introduction Getting started This chapter gives a detailed description of the administrator settings The administrator settings defines the system settings and are structured in a hierarchy, making up a database of system settings. NOTE: The description of the Administrator settings are preliminary, and subject to change.
- Page 20 In the following pages you will find a complete list of the administrator settings. The examples shows either the default value or an example of a value. We recommend you visit the TANDBERG web site regularly for updated versions of the manual. Go to: http://www.tandberg.com/docs...
- Page 21 (1 or 3). Auto: The system will select analog or digital (SPDIF) mode depending on the detected Audio Module. If a TANDBERG Digital NAM is detected then SPDIF mode will be selected, otherwise analog mode will be selected. SPDIF: Set to SPDIF when you want the Audio Line 1 or 3 output to be in digital mode. This will disable Output Line 2 and 4.
- Page 22 Applies to cameras which supports Flip mode. Enables the video on screen to be flipped upside down. Addresses the specific camera. TANDBERG PrecisionHD 1080p camera auto detects if the camera is mounted upside down, hence flip mode is not necessary.
- Page 23 Applies to cameras which supports Gamma mode. The Gamma Mode setting enables for gamma corrections. Gamma describes the nonlinear relationship between image pixels and monitor brightness. Addresses the specific camera. The TANDBERG PrecisionHD 1080p camera do not need Gamma Mode. The TANDBERG PrecisionHD camera do support Gamma Mode.
- Page 24 Codec C90 Contents Introduction Getting started Off: The system will not use encryption. Example: Conference 1 Encryption Mode: BestEffort Conference [1..1] DefaultCall Protocol: <H323/SIP> Specify the Default Call Protocol to be used when placing calls from the system. The call protocol can also be defined directly for each call when setting up a call.
- Page 25 Codec C90 Contents Introduction Getting started H323 Profile [1..1] Gatekeeper Discovery: <Manual/Auto> Determines how the system shall register to a H.323 Gatekeeper. Manual: The system will use a specific Gatekeeper identified by the Gatekeeper’s IP-address. Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper responds to the request sent from the codec within 30 seconds this specific Gatekeeper will be used.
- Page 26 Codec C90 Contents Introduction Getting started Network [1..1] IPv4 QoS Diffserv Audio: <0..63> The DiffServ Audio setting is used to define which priority Audio packets should have in an IP network. Enter a priority, which ranges from 0 to 63 for the packets. The higher the number, the higher the priority. These priorities might be overridden when packets are leaving the network controlled by the local network administrator.
- Page 27 SNMP requests. SNMP requests must have a ‘password’ (case sensitive) in order to receive a response from the SNMP Agent in the codec. The default password is “public”. If you have the TANDBERG Management Suite (TMS) you must make sure the same SNMP Community is configured there too. Note! The SNMP Community password is case sensitive.
- Page 28 Off: The system will not try to register to any management system. TMS: If set to TMS the system will try to register with a TMS server as described in Provisioning ExternalManager settings. TMS is short for TANDBERG Management System. Please contact your TANDBERG representative for more information.
- Page 29 Codec C90 Contents Introduction Getting started The SIP Profile settings SIP Profile [1..1] URI [1..1]: <S: 0, 255> The SIP URI or number is used to address the system. This is the URI that is registered and used by the SIP services to route inbound calls to the system.
- Page 30 Codec C90 Contents Introduction Getting started The System unit settings SystemUnit Name: <S: 0, 50> Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured on the system then this ID will be used instead of the system name. The system name will be displayed: * When the codec is acting as an SNMP Agent * Towards a DHCP server Format: String with a maximum of 50 characters.
- Page 31 Visca chain. Addresses the specific video input source. Cascaded cameras and Visca commands are described in the PrecisionHD 1080p User Guide. The user guide is found at www.tandberg.com/docs Example: Video Input Source 1 CameraControl CameraId: 1 Video Input Source [1..5] Name:...
- Page 32 The Advanced configurations menu has an option called Experimental. The settings within this menu can be used ‘as is’ and will not be documented. Note! The Experimental menu WILL change. We recommend you visit the TANDBERG web site regularly for updated versions of the manual. Go to: http://www.tandberg.com/docs Administrator Guide...
- Page 33 Getting started Your TANDBERG PrecisionHD 1080p Camera has been designed to give you many years of safe, reliable operation. Additional information about the camera is found in the TANDBERG PrecisionHD 1080p User Guide. D14129.02—NOVEMBER 2008 About the menus About the settings...
- Page 34 & power on the camera to the Camera port on the codec. When the camera is used with TANDBERG codecs power will be supplied through Camera Control cable. When used with non-TANDBERG Codecs, you may have to connect power separately. HDMI and HD-SDI •...
-
Page 35: Trademark
Settings Library Connecting HDMI HD Video out on camera to If you need to connect the camera to a TANDBERG Video Switch or to a system with a DVI-D socket, use the enclosed HDMI to DVI-D adapter. Administrator Guide Cameras... - Page 36 • Beard is normally not a problem. Using Best view Note that Best view works with TANDBERG C90 Codecs only! Press the Layout key on the remote control to display the Layout menu. Select Selfview to be shown as required.
- Page 37 Contents Introduction Getting started Video output formats This section describes the video output formats for the TANDBERG PrecisionHD 1080p camera. DIP switch settings for video output formats The video output format for the camera is set by DIP switches. The DIP switches are found on the bottom side of the camera.
-
Page 38: Cameras In Daisy Chain
Contents Introduction Getting started Cameras in daisy chain Example. Four daisy chained TANDBERG PrecisionHD 1080p cameras. A single daisy chain can have up to seven cameras. Cascaded cameras The sockets named Extra Camera and Power In are used when connecting cameras in daisy chain. - Page 39 Codec C90 Administrator Guide Appendices Contents Introduction Getting started About the menus About the settings Settings Library Cameras Appendices Contact us Chapter 7 Appendices In this chapter... General room guidelines Executive meeting room setup High end meeting room setup Video input matrix Software upgrade Upload certificates XML files...
- Page 40 The requirements for ventilation may be a little higher than in an ordinary meeting room. Consult the specifications for the monitor for data about the energy consumption. The TANDBERG Codec C90 together with the TANDBERG PrecisionHD 1080p camera has the following specifications: •...
- Page 41 Eye height Settings Library Cameras Appendices Ear height Speaker module (DNAM) The picture (TANDBERG T1) serves as an illustration to exemplify the content. PrecisionHD 1080p camera 65” LCD monitor The picture (TANDBERG T1) serves as an illustration to exemplify the content.
-
Page 42: Meeting Room
Codec C90 Contents Introduction Getting started Guidelines for the executive meeting room For executive meeting rooms and the executive office. General recommendations for the room layout To fully utilize the telepresence experience there are some guidelines you should consider. The distance between the table and the video system •... - Page 43 Codec C90 Contents Introduction Getting started Sharing a PC presentation General recommendations for the executive meeting room and executive office are described on the previous page. Dual video stream With dual video stream you can view two different live video streams simultaneously, the main video and one additional source.
- Page 44 Codec C90 Contents Introduction Getting started Guidelines for the high end meeting room For high end team collaboration rooms, team meeting rooms and showroom floor. General recommendations for the room layout To fully utilize the telepresence experience there are some guidelines you should consider.
- Page 45 Codec C90 Contents Introduction Getting started Sharing a PC presentation General recommendations for high end team collaboration rooms, team meeting rooms and showroom floor are described on the previous page. Dual video stream With dual video stream you can view two different live video streams simultaneously, the main video and one additional source.
- Page 46 Codec C90 Contents Introduction Getting started The Video Input Matrix The video input matrix is found at the rear side of the codec and illustrates the combinations in which the video inputs can be connected. About the matrix Only one video input source from each row can be active at any time. The numbers in the left column represents the Video Input Sources 1–5.
-
Page 47: Software Upgrade
Software upgrade The software upgrade procedure Upgrade tab lets you select the software Contact your TANDBERG representative to obtain the software upgrade file. upgrade file for TANDBERG Codec C90 and install the new software. Please follow the procedure described on this page. - Page 48 Codec C90 Contents Introduction Getting started Upload certificates The certificates upload procedure Upload certificates tab lets you upload a CA list Contact your system administrator to obtain the required files (.PEM format). (ROOT certificate) to authenticate TLS connections on SIP and a HTTPS certificate to enable HTTPS. The system administrator issues/obtains and installs unique certificates to each system.
- Page 49 Codec C90 Contents Introduction Getting started XML files View XML files XML files tab gives a complete overview of the Select the XML file to see a tree structure of all the configuration commands status of the system and the commands available on XML format.
-
Page 50: Log Files
Select a debug log file by clicking on the name of the file. These are TANDBERG specific debug files which Some of the log files can be opened or saved. may be required by TANDBERG in the need of technical support. D14129.02—NOVEMBER 2008... -
Page 51: Time Zone Settings
Codec C90 Contents Introduction Getting started NTP Time Zone expressions With reference to the Time zone setting in the Administrator settings menu, see the Specifies the NTP time zone where the system is located. Example 1: Time Zone: “America/New_York” Example 2: Time Zone: “Etc/UTC” NOTE: Spelling correctly is important when entering the NTP Time Zone expression. - Page 52 Codec C90 Contents Introduction Getting started NTP Time Zone expressions, cont... America/Pangnirtung America/Yellowknife America/Paramaribo Antarctica America/Phoenix Antarctica/Casey America/Port_of_Spain Antarctica/Davis America/Port-au-Prince Antarctica/DumontDUrville America/Porto_Acre Antarctica/Mawson America/Porto_Velho Antarctica/McMurdo America/Puerto_Rico Antarctica/Palmer America/Rainy_River Antarctica/Rothera America/Rankin_Inlet Antarctica/South_Pole America/Recife Antarctica/Syowa America/Regina Antarctica/Vostok America/Resolute Arctic America/Rio_Branco Arctic/Longyearbyen America/Rosario Asia America/Santiago Asia/Aden...
- Page 53 Codec C90 Contents Introduction Getting started NTP Time Zone expressions, cont... Canada/Newfoundland Etc/GMT-2 Canada/Pacific Etc/GMT-3 Canada/Saskatchewan Etc/GMT-4 Canada/Yukon Etc/GMT-5 Etc/GMT-6 Chile Etc/GMT-7 Chile/Continental Etc/GMT-8 Chile/EasterIsland Etc/GMT-9 CST6CDT Etc/Greenwich Cuba Etc/UCT Etc/Universal Egypt Etc/UTC Eire Etc/Zulu Europe EST5EDT Europe/Amsterdam Europe/Andorra Etc/GMT Europe/Athens Etc/GMT+0 Europe/Belfast...
- Page 54 Codec C90 Contents Introduction Getting started Supported RFCs in SIP The RFC (Request for Comments) series contains technical and organizational documents about the Internet, including the technical specifications and policy documents produced by the Internet Engineering Task Force (IETF). D14129.02—NOVEMBER 2008 About the menus About the settings Settings Library...
-
Page 55: Characters And Numbers
Codec C90 Contents Introduction Getting started TANDBERG Remote Control TRC5 Microphone: Press the key to toggle the microphones on/off. Volume: Press the – on the key to adjust the codec OK/Select: Press the key to confirm your choice or selection. - Page 56 Codec C90 Contents Introduction Getting started TANDBERG Remote Control TRC5 key map The TANDBERG Remote control TRC5 has the following button codes and IR signal parameters. D14129.02—NOVEMBER 2008 About the menus About the settings Button codes - Remote control TRC5...
-
Page 57: Cameras In Daisy Chain
Contents Introduction Getting started The PrecisionHD camera This page describes the TANDBERG PrecisionHD camera, which was the first TANDBERG HD camera. Connecting the camera Video out. For video out signals, connect from the HDMI on the camera to a HDMI video input on the codec. - Page 58 Contents Introduction Getting started CE Declaration for Codec C90 For an official, signed version of this document, or details regarding documentation from the technical construction file, please contact TANDBERG. EC Declaration of conformity MANUFACTURER: TANDBERG Telecom AS PRODUCT NAME: TANDBERG Codec C90...
-
Page 59: China Rohs Table
Codec C90 Administrator Guide Appendices Contents Introduction Getting started About the menus About the settings Settings Library Cameras Appendices Contact us China RoHS table This product complies with the Chineese RoHS. D14129.02—NOVEMBER 2008... -
Page 60: Tandberg Codec C90 Dimensions
Codec C90 Contents Introduction Getting started TANDBERG Codec C90 dimensions The TANDBERG Codec C90 dimensions in mm. D14129.02—NOVEMBER 2008 About the menus About the settings Front view Top view Appendices Settings Library Cameras Appendices Left side view Administrator Guide Contact us... -
Page 61: Precisionhd 1080P Camera Dimensions
Codec C90 Contents Introduction Getting started PrecisionHD 1080p camera dimensions 105,0 148,1 32,2 220,0 ø79,6 ø82,0 D14129.02—NOVEMBER 2008 About the menus About the settings Settings Library 105,9 (eye centre) 20,5 114,6 34,5 Administrator Guide Appendices Cameras Appendices Contact us 142,0 62,4 125,4 190,0... -
Page 62: Precisionhd Camera Dimensions
Codec C90 Administrator Guide Appendices Contents Introduction Getting started About the menus About the settings Settings Library Cameras Appendices Contact us PrecisionHD camera dimensions D14129.02—NOVEMBER 2008... -
Page 63: Technical Specifications
Up to 10 Mbps total MultiSite bandwidth • 1920x1080@50 fps (1080p50) • 1920x1080@30 fps (1080p30) FIREWALL TRAVERSAL • 1920x1080@25 fps (1080p25) • TANDBERG Expressway™ Technology • 1280x720@60 fps (720p60) • H.460.18, H.460.19 Firewall Traversal • 1280x720@50 fps (720p50) • 640x480@60 fps (480p60) VIDEO STANDARDS •... -
Page 64: D14129.02—November
All images in these materials are for representational purposes only, actual products may differ. TANDBERG and Expressway are registered trademarks or trademarks of TANDBERG in the U.S. and other countries. All other trademarks are property of their respective owners. Administrator Guide... -
Page 65: Philip Pedersens Vei
New York, NY 10036 Norway Telephone: +1 212 692 6500 Telephone: +47 67 125 125 Fax: +1 212 692 6501 Fax: +47 67 125 234 Video: +1 212 692 6535 Video: +47 67 126 126 E-mail: tandberg@tandberg.com E-mail: tandberg@tandberg.com D14129.02—NOVEMBER 2008...