TANDBERG Codec 3000 MXP Reference Manual page 68

Configuration-type Commands – xconfiguration / configuration.xml
Audio
cont...
Audio Stereo: <On/Off>
Turns stereo I/O mode On or Off.
xconfiguration audio stereo: on
Example:
Audio StereoSpeakers: <On/Off>
Turns stereo speakers On or Off.
Example: xconfiguration audio stereospeakers: on
Audio VCRDucking: <On/Off>
If VCR Ducking is set to On, the VCR audio level will be attenuated if someone talks into the microphone or at the far end.
xconfiguration audio vcrducking: on
Example:
Audio KeyTones: <On/Off>
If set to On there will be a sound indicator when pressing keys on the remote control.
xconfiguration audio keytones: on
Example:
Audio Inputs
Audio Inputs
Audio Inputs
Audio Inputs
D 13887.08
MAY 2008
Microphone [1..x] Level: <1..16>
6000 MXP: x=3 Defines the input levels for the different microphones.
3000 MXP: x=2 xconfiguration audio inputs microphone 2 level: 10
Example:
Microphone [1..x] Mode: <On/Off>
6000 MXP: x=3 Turns On or Off the different microphone inputs.
xconfiguration audio inputs microphone 2 mode: off
3000 MXP: x=2 Example:
Turns microphone 2 off.
Microphone [1..x] Mode: <Line>
Applies to 6000 MXP only! Here the Microphone 3 Mode can be set to Line. It then
6000 MXP: x=3
NOTE!
becomes a balanced line level input. The gain will be reduced accordingly.
3000 MXP: x=2
xconfiguration audio inputs microphone 3 mode: line
Example:
Sets microphone input 3 on a 6000 MXP to a balanced line level input.
Line [1..x] Level: <1..16>
6000 MXP: x=3 Defines the input levels for the different line inputs.
xconfiguration audio inputs line 2 level: 10
3000 MXP: x=2 Example:
Output Response Codec 3000 MXP
Stereo Settings
Out 1 Stereo Stereo Audio Out 1
mode I/O mode speakers
Analogue Off Off Loudspeaker mono
Analogue Off On Loudspeaker L
Analogue On Off Loudspeaker mono
Analogue On On Loudspeaker L
SPDIF Off Off Loudspeaker mono
SPDIF Off On Loudspeaker L & R
SPDIF On Off Loudspeaker mono
SPDIF
On On Loudspeaker L & R
Out 1 mode is controlled through the
68
TANDBERG 3000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Output Response Codec 6000 MXP
Audio Out 2 Audio Out 1
VCR Loudspeaker mono
Loudspeaker R Loudspeaker L
VCR Loudspeaker mono
Loudspeaker R Loudspeaker L
VCR Loudspeaker mono
VCR Loudspeaker L & R
VCR Loudspeaker mono
VCR Loudspeaker L & R
xconfiguration audio outputs line type command (overleaf)
By default, all inputs are
enabled. Just plug in an audio
source and it is active. Audio
inputs that are On will auto-
matically be mixed. Unconnected
inputs will automatically be
muted. Select Off to prevent
audio/noise from connected but
unused inputs.
The microphone inputs are
intended for electret type micro-
phones. The microphone inputs
are balanced with 24 V phantom
power.
MXP & 6000 MXP
Audio Out 2 Audio
Out 3
Aux VCR
Loudspeaker R VCR
VCR L VCR R
Loudspeaker R VCR
Aux VCR
Aux VCR
VCR L VCR R
VCR L VCR R