Conference - TANDBERG Codec 3000 MXP Reference Manual

Status Information – xstatus /xstatus.xml

Conference

Conference (type = Idle / PointToPoint / PointToMultiSite /
Idle
If type = the following will be included:
<Nothing>
Example:
*s Conference (type=Idle): /
*s/end
If type = PointToPoint the following will be included:
Calls:
CallRef [1..11]: 1..11
DuoVideo None / Ready / On):
(status =
None / Ready
If status = the following will be included:
<Nothing>
On
If status = the following will be included:
CallRef [1..11]: 0..11
LoudestParticipant:
CallRef: 0..11
Example:
*s Conference (type=PointToPoint):
Calls:
CallRef 1: 1
DuoVideo (status=Ready): /
LoudestParticipant:
CallRef: 1
*s/end
PointToMultiSite
If type = the following will be included:
Calls:
CallRef [1..11]: 1..11
None / Ready / On):
DuoVideo (status =
None / Ready
If status = the following will be included:
<Nothing>
Status information followed by a
D 13887.08
MAY 2008
MultiSite):
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
185
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP