TANDBERG Codec 3000 MXP Reference Manual page 93

Configuration-type Commands – xconfiguration / configuration.xml
ISDN
cont...
ISDN PRI
ISDN PRI
ISDN PRI
ISDN PRI
ISDN PRI
ISDN PRI
ISDN PRI
ISDN BRI
ISDN BRI
ISDN BRI
D 13887.08
MAY 2008
L2WindowSize: <1..7>
Max. No. of outstanding Iframes (ISDN Layer 2)
xconfiguration isdn pri L2windowsize:
Example:
Interface MaxChannels: <1..30>
Maximum number of channels the system may use at any given time.
xconfiguration isdn pri interface maxchannels: 23
Example:
Interface HighChannel: <1..31>
The highest numbered B-channel that may be used by the system when selecting channels for outgoing calls.
Example: xconfiguration isdn pri interface highchannel:31
Interface LowChannel: <1..31>
The lowest numbered B-channel that may be used by the system when selecting channels for outgoing calls.
xconfiguration isdn pri interface lowchannel:1
Example:
Interface Search: <High/Low>
Selects whether to start searching for available B-channels from the highest numbered channel or from the lowest numbered channel.
xconfiguration isdn pri interface search: high
Example:
Interface NumberRangeStart: <S: 0, 24>
Defines the number range start, supported by the PRI interface.
Example: xconfiguration isdn pri interface numberrangestart: 1
Interface NumberRangeStop: <S: 0, 24>
Defines the number range stop, supported by the PRI interface.
xconfiguration isdn pri interface numberrangestop: 8
Example:
SwitchType: <NI/ATT/Euro/1TR6/Japan/Australia/FETEX>
Selects BRI network type.
xconfiguration isdn bri switchtype: att
Example:
AutoActivation: <Off/Selected/All>
(ISDN Layer 1) Autoactivation of interface. Selected will activate those already On, All will activate all interfaces regardless of status.
Example: xconfiguration isdn bri autoactivation: all
MaxDeactiveTime: <1..60>
Max duration for Layer 1 in deactive state before auto activation (re)starts
xconfiguration isdn bri maxdeactivetime:
Example:
93
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP