Xacli - Status Type - Exposure Options - TANDBERG Codec 3000 MXP Reference Manual

Guide for system integrators
Table of Contents

Advertisement

About the TANDBERG API
XACLI – Status Type Commands – Exposure Options
About Exposure Options
Exposure options should be used to limit the amount of information returned. By adding an
exposure option after the address expression (XPath or TANDBERG SimplePath), the system
can be instructed to return parts of the information within an element structure only.
<status-type command> <address expression> <exposure option>
Supported exposure options:
-
hides all value elements
--
hides all sub-elements
Request for Call 1 element with exposure option
xstatus call 1 -
*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing, logTag=3):
Channels 1 (type=Incoming):
Encryption (status=Off): /
Audio (status=Active):
Video 1 (status=Active):
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):
Encryption (status=Off): /
Audio (status=Active):
Video 1 (status=Active):
Video 2 (status=Inactive): /
Data (status=Inactive): /
*s/end
OK
Request for Call 1 element with exposure option
xstatus call 1 --
*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing, logTag=3):
*s/end
OK
D 13887.08
MAY 2008
-
:
--
:
Request for Call 1 element with no exposure option
xstatus call 1
*s Call 1 (status=Synced, type=Vtlph, protocol=H323, direction=Outgoing, logTag=3):
CallRate: 768
RemoteNumber: "558458"
Mute: Off
Microphone: Off
Duration: 10
MuteOutgoing: Off
Channels 1 (type=Incoming):
Rate: 768
Restrict: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H264
Resolution: CIF
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
Channels 2 (type=Outgoing):
Rate: 768
Restrict: Off
Encryption (status=Off): /
Audio (status=Active):
Protocol: G722
Rate: 64
Video 1 (status=Active):
Protocol: H264
Resolution: CIF
Rate: 704
Video 2 (status=Inactive): /
Data (status=Inactive): /
*s/end
OK
56
TANDBERG 3000
MXP
& 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Codec 6000 mxp

Table of Contents