TANDBERG Codec 3000 MXP Reference Manual page 137

Configuration Storage Levels
RTP MTU — SSH Mode
Storage Level: Configuration:
1 RTP MTU: <400..1400>
1 RTP Ports: <Static/Dynamic>
1 Screensaver Delay: <1..480>
1 Screensaver Mode: <On/Off>
1 SelfViewOnStartup: <On/Off>
3 SerialPort [1..2] BaudRate: <1200/2400/4800/9600/19200/38400/57600/115200>
3 SerialPort [1..2] DataBits: <7/8>
3 SerialPort [1..2] Parity: <None/Odd/Even>
3 SerialPort [1..2] StopBits: <1/2>
3 SerialPort 1 Mode: <Control/Transparent>
3 SerialPort 2 Mode: <VISCA/Auto>
3 SIP Authentication Password: <S: 0, 60>
3 SIP Authentication UserName: <S: 0, 80>
3 SIP Mode: <On/Off>
3 SIP Server Address: <S: 0, 255>
3 SIP Server Discovery: <Manual/Auto>
3 SIP Server Type: <Auto/Nortel/Microsoft/Cisco/Alcatel/Experimental>
3 SIP TLS Verify <On/Off>
3 SIP Transport Default: <Auto/TCP/UDP/TLS>
3 SNMP CommunityName: <S: 0, 16>
3 SNMP HostIPAddr [1..3]: <S: 0, 64>
3 SNMP Mode: <On/Off/ReadOnly/TrapsOnly>
3 SNMP SystemContact: <S: 0, 70>
3 SNMP SystemLocation: <S: 0, 70>
1 SSH Mode: <On/Off>
D 13887.08
MAY 2008
137
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP