Connecting The Video Switch - TANDBERG Codec 3000 MXP Reference Manual

TANDBERG Video Switch
Connecting the Video Switch (I)
3
Connecting up to four
TANDBERG Precision
HD cameras:
 Connect TANDBERG Video
Switch power supply here.

Connect camera power
supply here.
The Codec must be equipped with
software version F6.1 or higher to
support the use of the Video Switch.
D 13887.08
MAY 2008


TANDBERG Video Switch
TANDBERG 6000 MXP Codec
RJ45–DB9 pinout is described in Camera Socket
sections for Codec 3000 MXP and Codec 6000
Camera 2

DVI – HDMI
DVI – HDMI
DB 9 – RJ 45
RJ11-RJ45 is described
MXP. on the next page.
234
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Camera 3

RJ 45 – DB 9
DVI – HDMI
Video in PC DVI-I in Audio in
2. Aux
3. Doc 4. VCR
PC Card
3 4 1
I
Data Video out DVI-I out
VCR
1 2
1. Single 2. Single 3. Dual Mic.1
O DC in USB USB Audio out
TANDBERG 3000 MXP Codec
To upgrade the software of the Precision HD camera, connect the
camera directly to the main camera socket of the Codec (the socket that
otherwise is used when connecting the Video Switch to the Codec).
Power the units and the upgrade will start automatically. The status will
be shown on the video system's monitor.
TANDBERG 3000 MXP & 6000 MXP
Camera 4

2
Ethernet
Camera
Mic.2
Net