Locallayout; Logo; Los - TANDBERG Codec 3000 MXP Reference Manual

Configuration-type Commands – xconfiguration / configuration.xml
Kiosk

— LoS

cont...
Kiosk OneClickConnect: <On/Off>
If turned On, you can make a call with a single click on the green call button on the remote control. The system will call the first entry in "My Contacts" in the Phone Book. NOTE:
This functionality will only work in Kiosk Mode. If set to Off: Does not allow for one click connect in Kiosk mode.
Example: xconfiguration kiosk oneclickconnect: off

LocalLayout

Mode: <Full/2Split/POP/POPwide>
Defines the picture layout to use on the local main monitor. POP and POPWide should only be used on wide screen monitors.
xconfiguration locallayout mode: full
Example:
LocalLayout Toggle: <PIP/POP>
Defines the behaviour of the Layout button on the remote control.
If set to POP the system will toggle through the different LocalLayout modes when pressing the Layout button.
If set to PIP, the system will display a PIP when pressing the Layout button.
xconfiguration locallayout toggle: pip
Example:
Logo: <On/Off>
If set to On the system will display a company logo will appear in the background of the welcome menu.
NOTE! The TANDBERG logo will be displayed if no other company logo is uploaded.
xconfiguration logo: on
Example:
LoS Duration
LoS Duration
LoS Inhibit: <0..65534>
Specifies the number of seconds to wait before issuing a new LOS pulse if the codec regains and subsequently loses H.221 frame align-
ment.
xconfiguration los inhibit: 15
Example:
D 13887.08
MAY 2008
Exponent: <10..30>
xconfiguration los duration exponent: 15
Example:
Offset: <0..65534>
Offset is specified in milliseconds
xconfiguration los duration offset: 100
Example:
The duration of the LoS-pulse can be calcu-
lated from:
Offset + 2
Duration =
100
TANDBERG 3000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Exponent
bit rate
LoS configurations are relevant
for systems with NET interface
(External Network) only.
MXP & 6000 MXP