About the TANDBERG API
XACLI – Configuration Type Operation
About Configuration Operations
Three operations can be performed on
configurations:
•
Configuration Help
•
Configuration Read
•
Configuration Set (Write)
Note!
•
*h
is used when returning the result
of a help query
•
*c is used when returning the result
of a read query
•
Nothing is used for configuration set
•
*d is used when returning the result
of an xdirectory read query.
D 13887.08
MAY 2008
Configuration Help
?
To get help on configurations, type
after the configuration path
(address expression):
<configuration-type command> <address expression> ?
EXAMPLE:
xconfiguration h323gatekeeper discovery ?
*h xConfiguration H323Gatekeeper Discovery: <Manual/Auto>
OK
To read configurations from the system just type the root command
(xConfiguration/xDirectory) followed by the path (address
expression):
<configuration-type command> <address expression>
EXAMPLE:
xconfiguration h323gatekeeper discovery
*c xConfiguration H323Gatekeeper Discovery: Manual
OK
Type a root command (xConfiguration/xDirectory) followed by
a valid path (address expression). The path must be terminated with a
colon before the value is added.
<configuration-type command> <address expression>: <value>
EXAMPLE:
xConfiguration H323Gatekeeper Discovery: Manual
46
TANDBERG 3000
MXP
& 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Configuration Read
Configuration Set (Write)
MXP