Sip - TANDBERG Codec 3000 MXP Reference Manual

Status Information – xstatus /xstatus.xml

SIP

SIP
Server Inactive / DNSFailed / Timeout / NoConnectionTCP / NoConnectionTLS / Active /
(status =
Inactive
If status = the following will be included:
<Nothing>
DNSFailed / Timeout / NoConnectionTCP / NoConnectionTLS / Active / Unknown
If status =
the following will be included:
Address:
Authentication: On/Off
Registration Inactive / Registering / Registered / Deregister /
(status =
Inactive/Registering/Registered/Deregister
If status =
URI:
If status = Failed the following will be included:
URI:
Cause:
Example:
*s SIP:
Server (status=Active):
Address: "10.47.8.88"
Authentication:
Registration (status=Registered):
URI: "lab2@tsip.lab"
*s/end
Status information followed by a
D 13887.08
MAY 2008
Unknown)
Failed)
the following will be included:
*
will not be shown unless Detailed Level has been set to 2 – see XACLI – Special commands – xpreferences
206
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP