TANDBERG Codec 3000 MXP Reference Manual page 179

Status Information – xstatus /xstatus.xml
Call
cont...
On
If status = the following will be included:
Type: DES / AES-128
RSVP*: On / Off
DynamicRate*:
TotalPackets*:
PacketLoss*:
Jitter*:
PacketsDropped*:
Data Active / Inactive):
(status =
Inactive
If status = the following will be included:
<Nothing>
Active
If status = the following will be included:
Type: LSD/MLP
Protocol: FECC
Rate:
RemoteIPAddress*:
LocalIPAddress*:
Encryption* On /
(status =
Off
If status = the following will be included:
<Nothing>
On
If status = the following will be included:
Type: DES / AES-128
RSVP*: On / Off
DynamicRate*:
TotalPackets*:
PacketLoss*:
Jitter*:
PacketsDropped*:
Status information followed by a
D 13887.08
MAY 2008
Off)
*
will not be shown unless Detailed Level has been set to 2 – see
Appears for incoming calls only
Appears for incoming calls only
XACLI – Special commands – xpreferences
179
TANDBERG 3000 MXP & 6000
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
MXP