Switch - TANDBERG Codec 3000 MXP Reference Manual

Status Information – xstatus /xstatus.xml

Switch

Switch (connected = True / False):
Input:
Format:
Sync:
Sync 1:
Sync 2:
Sync 3:
Sync 4:
Example:
*s Switch (connected=True):
Input: 1
Format: 1280X720p60
Sync: True
Sync 1: True
Sync 2: True
Sync 3: False
Sync 4: False
*s/end
xstatus switch will give information about sync status for the active input, the format, and sync status for all DVI-D inputs. Active input may differ from what is given in the xconfiguration Switch Source
INFO:
setting. This is because an external control system may also change the input. Information about software version and ID will be given by xstatus camera 1.
Status information followed by a
D 13887.08
MAY 2008
*
will not be shown unless Detailed Level has been set to 2 – see
208
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
XACLI – Special commands – xpreferences
TANDBERG 3000 MXP & 6000 MXP