Presetclear; Presetstore; Profileactivate; Profilecreate - TANDBERG Codec 3000 MXP Reference Manual

Command Information
PresetClear — ScreensaverActivate
Command Description

PresetClear

Command used to clear
a preset previously
stored.

PresetStore

Command used to store
a preset.

ProfileActivate

Command to activate an
existing user profile.

ProfileCreate

Configure the video
system and use this
command to create a
new user profile.

ProfileDelete

Command to delete an
user profile.

ProfileList

Command to list user
profiles.

ScreensaverActivate

Command used to
activate screensaver.
Required parameters are identified by an (r) appended to the parameter name. The
D 13887.08
MAY 2008
Parameters
Number(r): <0..14>
The preset to clear.
Number(r): <0..14>
The number where to store the
preset.
Name(r): <S: 0, 16>
The name of the user profile to
activate.
Name(r): <S: 0, 16>
The name of the user profile to
create.
Name(r): <S: 0, 16>
The name of the user profile to
delete.
None
None
(r) appears in this table for your information only and shall not be included when writing the commands – see the column Example for an illustration of this. Empty lines in the examples provided may have been removed to save space in the tables.
Result parameters Result parameters
when OK when error
None As above
None As above
None As above
None As above
None As above
None As above
None As above
161
TANDBERG 3000 MXP
REFERENCE GUIDE FOR SYSTEM INTEGRATORS
Example
xcommand presetclear number:4
*r Result (status=OK):
*r/end
OK
xcommand presetstore number:4
*r Result (status=OK):
*r/end
OK
xcommand profileactivate:profilename
*r Result (status=OK):
*r/end
OK
xcommand profilecreate:profilename
*r Result (status=OK):
*r/end
OK
xcommand profiledelete:profilename
*r Result (status=OK):
*r/end
OK
xcommand profilelist
*r Result (status=OK):
Available 1: "Office"
Available 2: "Home"
*r/end
OK
xcommand screensaveractivate
*r Result (status=OK):
*r/end
OK
& 6000 MXP